Frederosa’s Team Extreme parts sale. The team is heading for the asphalt in NHRA competition for 2013, which means they have lots of great parts for sale that can be used for sand drag racing. If you are interested in any of the parts listed below, contact Shane Sanford at 714-412-8628, call or text.

Tires & Wheels For Sale:
(1 Set) 36x17.5 Casings w/ 3 Dot Super Scoopers $1000
(2 Sets) 36/17 Casings w/ 3 Dot Super Scoopers $1000/set
(1 Set) 16x20 Real Wheels (Double Beadlocks) $500
(1 Set) Smoothies w/ Aluminum Wheels
(3 Sets) 36x17 Casings w/ Hookers $400/set


1996 285 inch Hansen Top alcohol dragster chassis. Former In n out Burger dragster of Gary Scelzi. Mag panels, 0.95 wall, powdercoated silver, front tank, All titanium hardware. Stange 10 inch rear end with Carbon fiber brakes. Rear wing and wing tree. Needs current cert. $8500.

 

500 KB stage 10 Nitro motor 4.250 3/4 stroke, 3 in main, New velasco crank, brooks rods, venolia pistons, crane cam, bAE 2 fuel heads with down nozzles, Engine plate,mag covers,
Stage 5 valve train, olsen pan and headers, KB oil pump, front gear drive and brackets.
3 runs since complete rebuild by Amos Sateerlee. $14,000


 
2- KB Blocks 3 in mains, 2 windows repaired 1- with 4.250 sleeves ready to run $1800 1- bare $1400
 
1- Mark Williams 11 inch complete rear end 3.20 gear dual caliper brakes, oiler, $8,000(14,000 new)
1- Strange 10 in in chrome housing, 40 spline, carbon brakes $3,000
Waterman 68 gpm dual pump with shutoffs (only 8 runs) $3500
2- Settles 62 gpm nucluer pumps with shutoffs $ 1300 each
2- engle 296 cams- $300 each
2- Big and Ugly injectors 6 inch tall $ 1200 each (1800 new)
2- Dual mag drives ( old dunn belt drive, one has air timer) $400 each
Racepak V300 computer and Dash- $3500
Race Pack Pro 1B-all channels-RPM,boost,OP.FP,DS,Clutch,plus, flowmeter and G meter, $6500
2- 426/4.250 3 in main Velasco cranks- Recent Mag Good $1200 each
1- Set of BAE 2 fuel heads with down nozzles complete- $4,000
2 - Trick Ti Clutch cans- 1- 8 1/8 1- 8 5/8 $1800 each ( no current cert)
1- 10 inch east west Pressure plate, flywheel, Tit, stands, $ 2,000
Lenco CS1 2 speed trans with blanket 1.50x 1.56 $2300
1- 38 % fine spline gear set $700
BAE Dual plug valve covers- $400
MSD Parts::: 4 red coils $200 each 2 Black Coils $100 each
2 44 mags $1300 each
2- Brand new sets of Venoila pistons (12) 4.250 x 1.094 $400 each
1- Brand new set of brooks 2 rods 6.918x1096 $500
1- Dual pick up old style KB oil pump $ 200
 
Rugged radio set- Driver and crew chief radio, two portables also plus all chargers $450
Barrel valve for Nitro- dual intake $1,000 (paid 1800 new)
Champion N10284 (144 plugs) New $300
2 big and Ugly restraints $150 each
CS1 reverser case $250
CS2 reverser case $250
MPR complete air cleaner for big and ugly $200
BAE Fuel intake manifold $800
Small pit pal $100 (400 new)
Smiley Fat head 5 headers for dragster $350
6- 8 mm 1600 mm Blue kevlar belts $40 each
Variety of 8mm pulleys 33,34,36, $80 each Haves sizes 60-80 range $120 each
20- 9 stand 11 inch floaters $30 each
10- 6 stand 10 inch floaters $20 each
MSD large red caps-2- $20 each

Buyer to pay shipping on all items: All items checked by Amos Satterlee Engines
Reply to all items on my cell phone: Shane (714) 412-8628 Fullerton, Ca. I will send photos to interested buyers.

National Sand Drag News © 2018 | TB Web Development